Commands Listed in Alphabetical Order
MATH:DEFINE "I
NTG(1+CH1) + SINE(CH 1)*(VAR1+CH2)*CH3 -
CAREA(CH4)"
Some examples of SPE CTRUM math expressions are as follows:
MATH:DEFIN
E "RF_NOR MAL - RF_ AVERAGE"
MATH:DEFINE "RF_NORMAL * RF_AVE RAGE"
MATH[1]:HORizontal:POSition
This command specifies the math horizontal display position for FFT or (non-live)
math reference waveforms.
Group
Math
Syntax
MATH[1]:HORizontal:POSition <NR3>
MATH[1]:HORizontal:POSition?
Arguments
<NR3> is a floating point number that specifies the % of the math waveform that
precedes center screen. It can vary from 0.0 to 100.0.
Examples
MATH:HORIZONTAL:POSITION 10 sets the horizontal position to 10% pretrigger
MATH[1]:HORizontal:SCAle
This command specifies the math horizontal display scale for FFT or for dual
math waveforms that have source waveforms that are reference waveforms. The
horizontal scale of a dual math waveform with a channel source waveform is set
through the command.
Group
Math
Syntax
MATH[1]:HORizontal:SCAle <NR3>
MATH[1]:HORizontal:SCAle?
Arguments
<NR3> is a floating point number that specifies the math horizontal scale, in
seconds.
2-414 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
