Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
LIN specifies th
eLINbus.
FLEXRay specifies the FlexRay bus.
AUDio specifies the audio bus.
ETHERnet specifies the Ethernet bus.
MIL1553B specifies the MIL-STD-1553 bus.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS? might return
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:SPI:CO NDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B2:SP I:CONDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B3:SP I:CONDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B4:SP I:CONDITION
SS;:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:SP I:DATA:MOSI:VALUE "XX"
.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:CONDition
This command sets the condition (word start, label, matching data, word end, or
error) to be used to search on ARINC429 bus data. SEARCH<x> is the search
number, which is always 1. B<x> is the bus number.
Conditions
This command requires installation of a DPO4AERO application module for
MDO4000C models, or MDO3AERO for MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:AR INC429A:CONDition
{STARt|END|LABel|DATA|LABELANDDATA|ERR or}
SEARCH:SEARCH<x>:TRIGger:A:B
US:B<x>:ARINC429A:CONDition?
Related Commands
Most of the other SEARCH:SEARCH<x>:TRIGger:A:B US:B<x>:ARINC429A
commands are impacted by the se
tting of this command.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ARINC429A:ERRTYPE
TRIGger:A:BUS:B<x>:ARINC429A:CONDition
BUS:B<x>:ARINC429A:SOUrce
Arguments
STARt specifies a search based on the first bit of a word.
END specifiesasearchbasedonthe32ndbitofaword.
LABel specifies a search for a matching label.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-611

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English