Commands Listed in Alphabetical Order
Syntax
SELect:RF_FRE
Quency {O FF|ON|0|1}
SELect:RF_FREQuency?
Arguments
OFF or 0 turns the RF Frequency vs. Time trace display off.
ON or 1 turns it on.
SELect:RF_MAXHold
This command switches the frequency domain Max Hold trace display on or
off in the frequency domain graticule.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
SELect:RF_MAXHold {OFF|ON|0|1}
SELect:RF_MAXHold?
Arguments
OFF or 0 turns the frequency domain Max Hold trace display off.
ON or 1 turns it on.
SELect:RF_MINHold
This command switches the frequency domain Min Hold trace display on or
off in the frequency domain graticule.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option SA3 or SA6 only.
Group
RF
Syntax
SELect:RF_MINHold {OFF|ON|0|1}
SELect:RF_MINHold?
Arguments
OFF or 0 turns the frequency domain Min Hold display off.
ON or 1 turns it on.
2-760 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
