Commands Listed in Alphabetical Order
Arguments
<QString> is a t
ime in the form "hh:mm:ss" where hh refers to a two-digit hour
number, mm refers to a two-digit minute number from 00 to 59, and ss refers to a
two-digit second number from 00 to 59.
Examples
TIME "14:00:00" sets the time to exactly 2:00 p.m.
TIME? might return :TIME "14:05:17” indicating the current time is set to 2:05
p.m. and 17 seconds.
TOTaluptime? (Query Only)
This query returns the total number of hours that the oscilloscope has been
powered on since the nonvolatile memory was last programmed (usually sincethe
initial manufacturing process).
Group
Miscellaneous
Syntax
TOTaluptime?
*TRG (No Query Form)
Performs a group execute trigger on commands defined by *DDT.
Group
Miscellaneous
Syntax
*TRG
Related Commands
*DDT
Examples
*TRG immediately executes all commands that have been defined by *DDT.
TRIGger (No Query Form)
Forces a trigger event to occur.
Group
Trigger
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-769
To Next Page
Loading...
Need help?
General
