Commands Listed in Alphabetical Order
THReshold, TRI
Gger:A:SETHold:DATa:SOUrce, TRIGger:A:SETHold:DATa:
THReshold, TRIGger:A:SETHold:HOLDTime, TRIGger:A:SETHold:SETTime,
TRIGger:A:SETHold:THReshold:CH<x>,andTRIGger:A:SETHold:THReshold:
D<x>.
Examples
TRIGGER:A:LOGIC:CLASS? might return :TRIGGER:A:LOGIC:CLASS LOGIC
TRIGGER:A:LOGIC:CLASS LOGIC
sets the trigger A logic class to LOGIc,which
causes the oscilloscope to trigger when the specified logical combinationsof
channels 1, 2, 3, and 4 are met.
TRIGger:A:LOGIc:FUNCtion
This command specifies the logical combination of the input channels for the
A pattern and A state logic triggers.
Group
Trigger
Syntax
TRIGger:A:LOGIc:FUNCtion {AND|NANd|NOR|OR}
TRIGger:A:LOGIc:FUNCtion?
Related Commands
TRIGger:A:LOGIc:INPut:CH<x>
Arguments
AND specifies to trigger if all conditions are true.
NANd specifies to trigger if any of the conditions is false.
NOR specifies to trigger if all conditions are false.
OR specifies to trigger if any of the conditions is true.
Examples
TRIGGER:A:LOGIC:FUNCTION? might return :TRIGGER:A:LOGI C:FUNCTION
NAND
which indicates that
the oscilloscope will trigger if the AND logic conditions
are false.
TRIGGER:A:LOGIC:FUNCTION AND sets the logical combination of channels to
be true when all conditions are true.
TRIGger:A:LOGIc:INPut? (Query Only)
Returns the logic input values for all channels. If a clock channel is defined,
it returns the clock source and edge.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-881
To Next Page
Loading...
Need help?
General
