Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Syntax
TRIGger:EXTer
nal?
TRIGger:EXTernal:PRObe
This command specifies the attenuation factor value of the probe attached tothe
Aux Input connector.
Conditions
For MSO/DPO 4000B series models, MDO4000C series models without an RF
option, and 2-channel MDO3000 models only.
Group
Trigger
Syntax
TRIGger:EXTernal:PRObe <NR3>
TRIGger:EXTernal:PRObe?
Arguments
<NR3> is a floating point number that specifies the attenuation factor of the probe.
Examples
TRIGGER:EXTERNAL:PROBE? might return :TRIGGER:EXTERNAL:PROBE
1.0E1
for a 10X probe.
TRIGger:EXTernal:YUNIts? (Query Only)
Returns the vertical (Y) units of the probe attached to the Aux In connector.
Conditions
For MSO/DPO 4000B series models, MDO4000C series models without an RF
option, and 2-channel MDO3000 models only.
Group
Trigger
Syntax
TRIGger:EXTernal:YUNIts?
Examples
TRIGGER:EXTERNAL:YUNITS? might return TRIGGER:EXTERNAL:YUNITS
“A”
if the probe connected to Aux In is a current probe.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-929

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English