Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Syntax
TRIGger:B:TIM
e <NR3>
TRIGger:B:TIMe?
Related Commands
TRIGger:B:BY
, TRIGger:B:EVENTS:COUNt
Arguments
<NR3> is a floating point number that specifies the B trigger delay time in seconds.
Examples
TRIGGER:B:TIME 4E-6 sets the B trigger delay time to 4 µs.
TRIGGER:B:TIME? might return :TR IGGER:B:TIME 16.0000E-9 indicating
that the B trigger time is set to 16 ns.
TRIGger:B:TYPe
This command specifies the type of B trigger. The only supported B trigger type
is EDGE.
Group
Trigger
Syntax
TRIGger:B:TYPe EDGE
TRIGger:B:TYPe?
Related Commands
TRIGger:A:TYPe
Arguments
EDGE sets the B trigger type to edge.
Examples
TRIGGER:B:TYPE EDGE sets the B trigger type to edge.
TRIGGER:B:TYPE? might return:TRIGG ER:B:TYPE EDGE.
TRIGger:EXTernal? (Query Only)
Returns all external trigger-related parameters for the probe attached totheAux
Input connector.
Conditions
For MSO/DPO 4000B series models, MDO4000C series models without an RF
option, and 2-channel MDO3000 models only.
Group
Trigger
2-928 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English