Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Group
Video Picture
Syntax
VIDPic:BRIGHTNess <NR1>
VIDPic:BRIGHTNess?
Arguments
Integer that represents the video picture brightness level as an integer percentage,
in the range of 0 to 100.
Examples
VIDP:BRIGHTN 49 sets the video picture brightness level to 49 percent.
VIDPic:CONTRast
Sets (or queries) the video picture contrast level as an integer
percentage.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
Group
Video Picture
Syntax
VIDPic:CONTRast <NR1>
VIDPic:CONTRast?
Arguments
Integer that represents the video picture contrast level as an integer percentage, in
the range of 0 to 100.
Examples
VIDP:CONTR 49 sets the video picture contrast level to 49 percent.
VIDPic:DISplay
Sets (or queries) the video picture display state.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
Group
Video Picture
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-937

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English