Commands Listed in Alphabetical Order
Syntax
VIDPic:DISpla
y {0|1|OF F|ON}
VIDPic:DISplay?
Arguments
1 or ON turns on the video picture display feature.
0 or OFF turns it off.
Examples
VIDP:DIS ON turns on the video picture display feature.
VIDPic:FRAMETYPe
Sets (or queries) the video picture frame type (ODD, EVEN or INTERLAced).
Interlaced frames combine successive odd and even frames by displaying
alternating lines from each. The resulting image has twice as many rows, which
changes its aspect ratio.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
Group
Video Picture
Syntax
VIDPic:FRAMETYPe {ODD|EVEN|INTERLAced}
VIDPic:FRAMETYPe?
Arguments
ODD sets the frame type to Odd.
EVEN sets the frame type to Even.
INTERLAced sets the frame type to Interlaced.
Examples
VIDP:FRAMETYP EVEN sets the video picture frame type to Even.
VIDPic:LOCation:HEIght
Sets (or queries) the video picture height, in rows.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
2-938 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
