Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Group
Video Picture
Syntax
VIDPic:LOCation:HEIght <NR1>
VIDPic:LOCation:HEIght?
Arguments
Integer that represents the video picture height, in rows. This value must be >=
1. The range is from 1 - 400.
Examples
VIDP:LOC:HEI 253 sets the video picture height to 253 rows.
VIDPic:LOCation:OFFSet
Sets (or queries) the video picture line-to-line offset
. This is the amount of
additional delay time to add between lines of the video picture.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO
4000B models.
Group
Video Picture
Syntax
VIDPic:LOCation:OFFSet <NR3>
VIDPic:LOCation:OFFSet?
Arguments
Floating point number that represents the video picture
line-to-line offset in the
range of -63.5 microseconds to 63.5 microseconds, with a resolution 1.0E-10
(1.0 nsec). The default value is 56.6E-9.
Examples
VIDP:LOC:OFFS -63.5 sets the video picture line-to-line offset to
-63.5 microsecon
ds.
VIDPic:LOCation:STARt:LINE
Sets (or queries) the video picture starting line number.
Conditions
MDO3000 series. Requires option SA3 or SA6 for the MDO4000C series.
Requires the DPO4VID application module for use with MSO/DPO4000B,
MDO4000 and MDO4000B models.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-939

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English