Tektronix MDO3024 Installation And Safety Instructions

开机和关机步骤
功能检查
执行此快速功能检查以验证示波器是否正常工作。
1. 按照“打开示波器电源”中的叙述连接示波器的电源线。 ( 见第111
页，
开机和关机步骤 )
2. 打开示波器电源。
3. 将探头 TPP0250、TPP0500B 或 TPP1000 端部和参考导线连接到示波器
的 PROB
E COMP（探头补偿）连接器上。
4. 按“Default Setup（默认设置）”。
112 MDO3000 Installation and Safety Instructions

Tektronix MDO3024 Specifications

General

Analog Channels	4
Bandwidth	200 MHz
Sample Rate	2.5 GS/s
Record Length	10 Mpoints
Digital Channels	16 (optional)
Spectrum Analyzer Frequency Range	9 kHz to 3 GHz
Digital Voltmeter	4-digit
Vertical Resolution	8 bits
Operating Temperature	0 °C to +50 °C
Display	9-inch WVGA (800x480) color display
Connectivity	USB, LAN, GPIB (optional)
Arbitrary Function Generator	50 MHz
Trigger Modes	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold
Input Impedance	1 MΩ ±1%
Max Input Voltage	300 VRMS
Trigger Types	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold