Tektronix MDO4104-6 - Page 175

Analyze Wavefor
morTraceData
3. Push the lower-bezel menu Select Mask
item and, from the resulting side menu,
select Standa
rd.
4. Push the lower-bezel Select Standard.
5. Use the resul
ting side menu items to s elect
the desired standard to use.
6. Push OK Appl
yStandardon the side-bezel
menu.
Create a custom mask. There are three ways to create a custom mask. You can edit a standard mask, load a mask
from a text file, or create a mask via a remote interface.
Createacustommaskbyeditingastandardmask.
1. Push the front-panel Test button.
2. Push the lower-bezel menu Application
item. Turn multipurpose knob a to select
Limit/Mask Test from the menu.
3. Push the lower-bezel menu Select Mask
item and, from the resulting side menu,
select Standard.
4. Push the lower-bezel Select Standard.
5. Use the resulting side-bezel menu to select
the desired standard to use.
6. Push OK Apply Standard on the side-bezel
menu.
7. Push the lower-bezel Set Up Mask.
8. Push Copy Active Mask to Custom from
the resulting side-bezel menu.
156 MDO4000 Series Oscilloscopes User Manual