Changing the date and time
Set the current date and time so that files that you save are marked with the
correct date and time. The date and time are shown in the lower-right corner of
the screen. Time is shown using a 24-hour clock.
NOTE. The clock does not automatically adjust for seasonal time changes. The
calendar does adjust for leap years.
The following steps show how to set the oscilloscope clock with the current date
and time. These steps also introduce you to more functions of the menu system.
1. Push Utility front-panel button.
2. Push Set Date & Time side-menu button. The oscilloscope shows the Set
Date & Time menu.
3. Turn the Multipurpose knob to select the Year field.
Getting acquainted with the oscilloscope
TBS2000B Series Oscilloscopes User Manual 19
To Next Page
Loading...
Need help?
General
