Tektronix TBS2202B

5. Use the Multipurpose knob and side-menu buttons to enter the password
that lets you disable Cursor.
6. Push OK side-menu button to enter the password and let you disable Cursor.
How to change the cursor password
Use this procedure to change the cursor password. The cursor requires a
password to enable or disable the cursor function.
1. Push Utility.
2. Push -More- Page 1/2 side-menu button.
3. Push Cursor Enable side-menu button.
4. Use the Multipurpose knob to select and click Change Password. The
oscilloscope opens the Change Password entry screen.
5. Use the Multipurpose knob and side-menu buttons to select the
alphanumeric and enter characters for the current password.
6. Push OK side-menu button.
Analyzing a waveform
108 TBS2000B Series Oscilloscopes User Manual