Operating Basics
26
TDS 200-Series Digital Oscilloscope User Manual
8. Readout shows trigger source used for triggering.
9. Readout shows window time base setting if it is in use.
10. Readout shows main time base setting.
11. Readouts show the vertical scale factors of the channels.
12. Display area shows on-line messages momentarily.
13. On-screen markers show the ground reference points of the
displayed waveforms. No marker indicates the channel is not
displayed.
Using the Menu System
The user interface of the TDS 200-series oscilloscopes was designed
for easy access to specialized functions through the menu structure.
When you press a menu button on the front panel, the associated
menu title displays at the top right of the screen. There can be up to
five menu boxes below the menu title. To the right of each menu box
is a bezel button you can use to change the menu setting.
There are four types of menu boxes you can use to change settings:
Circular Lists, Action Buttons, Radio Buttons, and Page Selections.
Circular List Menu Boxes
A Circular List menu box appears with a title on top with the
selected choice listed below in reverse video. For example, you can
push the menu box button to cycle through the vertical coupling
choices in the CH1 Menu.
To Next Page
Loading...
Need help?
General
