Tektronix TDS 200-Series - Horizontal Controls

Application Examples
62
TDS 200-Series Digital Oscilloscope User Manual
TDS 210 and TDS 220 Oscilloscopes (Firmware Below V 2.00) without a
TDS2MM
Press the CH1–CH2 menu box button to display a new waveform
that is the difference between the displayed waveforms.
TDS 210 and TDS 220 Oscilloscopes (Firmware Below V 2.00) with a
TDS2MM
Do these steps:
1. Push the CH2 MENU button and then push the CH2 Inverted
menu box button to invert the signal on channel 2.
2. Push the MATH MENU button and then push the CH1+CH2
menu box button to display a new waveform that is the difference
between the displayed waveforms.