Tektronix TDS200 Series - Page 135

Command Descriptions
TDS200/1000/2000 Series Oscilloscope Programmer Manual
2−1 17
MEASUrement:MEAS<x>?
Settings for the specified measurement source.
MEASUrement:MEAS3?
might return PERIOD;s";CH1
MEASUrement:MEAS<x>:SOUrce
Sets or queries the source for the measurement. This is equivalent to
selecting the measurement source in the MEASURE menu.
Measurement
MEASUrement:MEAS<x>:SOUrce CH<y>
MEASUrement:MEAS<x>:SOUrce?
CH<y> specifies the measurement source channel.
MEASUrement:MEAS2:SOUrce CH1
Sets the source of MEAS2 to channel 1.
MEASUrement:MEAS<x>:TYPe
Sets or queries the on-screen periodic oscilloscope measurement type
for the measurement specified by <x>. This is equivalent to selecting
the measurement type in the MEASURE menu. Setting the type to
anything other than NONE displays the MEASURE menu on the
screen.
Syntax
Returns
Examples
Group
Syntax
Arguments
Examples