Triggering
3-114
CSA7000 Series, TDS7000 Series, & TDS6000 S eries Instruments User Manual
Read the following topics; they provide details that can help prevent false steps
in setting up to trigger on your waveforms.
Trigger Sources. In most cases, it makes sense to set separate trigger sources for
the A (Main) and B (Delayed) triggers. Line is not available as a source for the B
trigger.
Trigger Types. When using sequential triggering, the A trigger must be set to one
of the following types: Edge, Glitch, or Width. The B trigger is always Edge
type.
Using Sequential
Triggering
To Next Page
Loading...
