TS4000 Radio Modem User’s Manual AirNet Packet Protocol 51
The TS4000 is very versatile and can be configured for virtually any system
topology. If one of the above topologies cannot be adapted to match a particular
network then Teledesign can work with you to create a suitable configuration.
Other System
Topologies
The TS4000 also has the capability to selectively repeat messages from groups
or individual remotes. This feature can be used to allow for more complicated
topologies and to minimize the throughput delay.
The following questions will need to be answered prior to creating a suitable
configuration.
1) What sites (base, repeater and remote) can hear each other? In many
cases this can be adjusted by using a directional antenna at the remotes
and pointing them appropriately.
2) What is the maximum message size of the polling message outbound
from the base site to the remotes?
3) What is the maximum message size of the response message inbound
from the remotes to the base site?
To Next Page
Loading...