Telefire TSA-1000

To Next Page

To Previous Page

TSA-1000

– Page 32 of 32 –

Key Function

Enter Menu

Arrows

Paging through memory

Buzzer Off /

Ack / Prog

• Is used for silencing the internal alarm buzzer and fault buzzer

in the control panel

• Acknowledges new event. Pressing this key will stop the LED

flashing (indicating new events) and turn the LED ON

• Used for computer printing

Silence /

Resound

• Used for silencing the alarm horns. Devices connected to the

Horn output will be silenced. Devices connected to a

programmed alarm output will be silenced if the output is

defined as silenceable.

• An additional long press will re-activate the output

Reset

• Is used to reset alarms and return the system to normal

operations after an alarm. All outputs in the control panel and

inputs to the system are returned to normal operation. The

digital display will show the figure "8" moving from left to right.

The system will return to alarm or fault state during additional

events

• Is used for exiting the menu.

Telefire TSA-1000 - Page 40