J
John JohnsonSep 14, 2025
What should I do if my Telefire TSA-1000 shows 'Annunciator # is disconnected'?
- RRichard SmithSep 14, 2025
If your Telefire Control Panel displays 'Annunciator # is disconnected', reconnect the annunciator to the system.
To Next PageTo Next PageWhat should I do if my Telefire TSA-1000 shows 'Annunciator # is disconnected'?
If your Telefire Control Panel displays 'Annunciator # is disconnected', reconnect the annunciator to the system.
What to do if my Telefire TSA-1000 has a disconnected battery?
If the Telefire Control Panel displays a disconnected battery, reconnect the battery to restore power and functionality.
How to fix no input power on Telefire Control Panel AC LED?
If there is no input power indicated by the AC LED on your Telefire Control Panel, check the AC power supply and connections to ensure they are properly connected.
What to do if the Telefire TSA-1000 Control Panel shows a 24Vdc fault?
If your Telefire Control Panel is showing a 24Vdc fault, check the 24Vdc supply and connections to ensure everything is properly connected.
What does 'Annunciator # is connected, but is not configured' mean on my Telefire TSA-1000 and how do I fix it?
If your Telefire Control Panel displays 'Annunciator # is connected, but is not configured', configure the annunciator in the system settings.
What does 'Checksum error on site–specific data. Return the control panel to the factory default configuration' mean on my Telefire Control Panel and how do I fix it?
If your Telefire Control Panel displays 'Checksum error on site–specific data. Return the control panel to the factory default configuration', reset control panel to factory default and reconfigure.
What to do if my Telefire TSA-1000 Control Panel says 'Horn output disabled'?
If your Telefire Control Panel indicates that the 'Horn output disabled', ensure that the horn output is properly configured.
What to do if my Telefire TSA-1000 says 'Dialer disabled'?
If your Telefire Control Panel indicates that the 'Dialer disabled', ensure the dialer is properly installed and configured.
What to do if my Telefire TSA-1000 Control Panel displays 'Open wire on zone #'?
If your Telefire Control Panel displays 'Open wire on zone #', inspect wiring and connections for zone #.
What to do if my Telefire Control Panel shows 'Ground fault – negative wire leakage'?
If the Telefire Control Panel displays 'Ground fault – negative wire leakage', inspect the negative wiring for leaks.
Guidelines for safe electrical grounding and mains connection.
Precautions and procedures for handling and maintaining batteries.
Description of the primary components of the TSA-1000 control panel.
Available modules to extend the panel's functionality.
Comprehensive table of the TSA-1000's technical specifications.
Details on the power supply, charger, and battery requirements.
Description of the main board, its connectors, and interfaces.
Overview of the general display area and its LEDs.
Details on the digital display and its indicators.
Details on how the panel indicates and handles alarm states.
Explanation of how the panel indicates and manages fault states.
Planning considerations before installing the control panel.
Recommendations and procedures for physically mounting the control panel.
General information and best practices for wiring the system.
How to connect the control panel to the mains power supply.
How automatic extinguishing sequences are initiated and managed.
Types of adapters needed to connect extinguishing devices.
Overview of the programming menu hierarchy and navigation.
Steps to access the control panel's programming mode.
Step-by-step process for programming panel parameters.
How to configure input zones and their types.
How to configure system outputs and their operating modes.
Procedures for saving programmed settings and exiting the mode.
Instructions for performing field tests on system devices.
How to reset the panel to its factory default settings.
Codes and descriptions for various system faults.
Common faults encountered during programming and their resolutions.
General| Brand | Telefire |
|---|---|
| Model | TSA-1000 |
| Category | Control Panel |
| Language | English |
