TSA-1000
© 2008 – 2012 Telefire Fire & Gas Detectors Ltd Revision 1.12 האיגש !אצמנ אל הינפהה רוקמ. 2
– Page 74 of 74 –
18 Maintenance
No specific maintenance is required for the TSA1000.
Keep the TSA1000 clean and dry. If necessary, clean the outside of the enclosure with a
slightly damp cloth.
The batteries should be tested and replaced according to the instructions of the battery's
manufacturer.
If the batteries show any signs of swelling, leakage or corrosion, or the ECD indicates a
battery fault, replace with a new set.
Maintenance routine:
Verify that the field wires are fully inserted into the TB, and no wires are broken.
Tighten the TBs, if necessary
Verify ECD is in the quiescent condition
To Next Page
Loading...
