TSA-1000
© 2008 – 2012 Telefire Fire & Gas Detectors Ltd Revision 1.12 האיגש !אצמנ אל הינפהה רוקמ. 2
– Page 71 of 71 –
E 6 0
A relay was defined without defining output type
E 6 1
Non-consecutive relay number (e.g., an expansion module was
configured as relays 5 – 7 instead of 4 – 6)
E 6 2
A relay was defined as a supervisory output, but no supervisory
input was defined
E 6 3
Wrong definition of alarm relay
E 6 4
A supervisory relay is defined without supervisory inputs
E 6 5
A relay matrix is defined without inputs
n S v Not Saved – the programming modification was not saved to
permanent memory
To Next Page
Loading...
