30 en | Disassembly AIRMAN 8+
2024-11 | 07 | F.01U.387.060
Customer Maintenance Manual
Bosch Security Systems, LLC
3. Using a T-5 screwdriver, remove three screws (as shown).
4. Remove the housing and the yoke/glider assembly.
5. Using a T-5 screwdriver, remove two screws (as shown).
6. Remove the PCBA.
7. Using a soldering iron, carefully disconnect the wires from the speaker, overhead cord,
boom mic assembly, and ANR mic solder terminals, as needed.
To Next Page
Loading...
