Telex AIRMAN 8+ - Attach the Prefilter; Replace the Yoke Assembly on the Headband Assembly

40 en | Assembly AIRMAN 8+
2024-11 | 07 | F.01U.387.060
Customer Maintenance Manual
Bosch Security Systems, LLC
7.3 Attach the prefilter
To attach the prefilter, do the following
4 Carefully clip the prefilter to the mic.
7.4 Replace the yoke assembly on the headband assembly
To replace the yoke assembly on the headband assembly, do the following:
1. Slide the yoke assembly onto the headband.
2. Place the glider stop in the appropriate hole on the glider.
3. Swivel the spacer in line with the glider.
4. Click the bottom edge of the black plastic spacer into the retaining hole.