LE910C1 Hardware User Guide
1VV0301298 Rev. 1.08 - 2017-11-14
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
119 of 119
Revision Date Changes
1.01 2017-02-16 Adding Section 14: FCC/ISED Regulatory notices
Changing Document History section from 14 to 15
1.02 2017-04-03 Section 14.1 – updated column “Band” to “Frequency Band” in
Wireless notice table
Section 8.4.1 - Added note regarding DTR
1.03 2017-04-23 Section 11.4 – Updated ESD values
Updated Reference document table
Section 8.3 - Updated Ethernet control interface information
Section 8.5.2 – Added note related to I2C
Section 2.6.2 – Updated table 4 with B25 information.
Section 14.1 – Added LE910C1 NS Max antenna gain.
Added LE910C1 NS FCC ID & IC number.
1.04 2017-05-25 Section 14.1 – Added Labelling Requirements for the Host device
1.05 2017-06-18 Section 6.1 – Updated power consumption tables
1.06 2017-07-10 Renaming the product from LE910Cx to LE910C1
1.07 2017-07-23 Adding a note for power supply section
1.08 2017-11-14 Section 2.6.2 - Changed B41 to B41M
Section 2.7 – Renamed from Sensitivity to RF parameters and added
TX output power section (2.7.2)
Section 2.8 – Added note regarding label thickness
Section 3.1 - Removed duplication of description related to
USB_VBUS.
Section 5.2 – Added clarification regarding ON_OFF.
Section 7.5 – Added note related to GPS port.
Section 8.1 – Added clarification regarding VBUS supply.
Section 8.1.1 – Added clarification regarding OTG.
Section 8.3.1 – Added clarification regarding ETH_INT_N pin.
To Previous Page
Loading...
Need help?
General
