LE910C1 Hardware User Guide
1VV0301298 Rev. 1.08 - 2017-11-14
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
13 of 119
1. Introduction
1.1. Scope
This document introduces the Telit LE910C1C1 module and presents possible and recommended
hardware solutions for developing a product based on the LE910C1C1 module. All the features
and solutions detailed in this document are applicable to all LE910C1C1 variants, where
“LE910C1C1” refers to the variants listed in the applicability table.
If a specific feature is applicable to a specific product only, it will be clearly marked.
NOTE:
LE910C1C1 refers to all modules listed in the Applicability Table.
This document takes into account all the basic functions of a wireless module; a valid hardware
solution is suggested for each function, and incorrect solutions and common errors to be avoided
are pointed out.
Obviously, this document cannot embrace every hardware solution or every product that can be
designed. Obviously, avoiding invalid solutions must be considered mandatory. Where the
suggested hardware configurations need not be considered mandatory, the information given
should be used as a guide and a starting point for properly developing your product with the Telit
LE910C1C1 module.
NOTE:
The integration of the GSM/GPRS/EGPRS/WCDMA/HSPA+/LTE LE910C1C1 cellular module within
a user application must be done according to the design rules described in this manual.
1.2. Audience
This document is intended for Telit customers, especially system integrators, about to implement
their applications using the Telit LE910C1C1 module.
1.3. Contact Information, Support
For general contact, technical support, to report documentation errors and to order manuals,
contact Telit’s Technical Support Center (TTSC) at:
• TS-EMEA@telit.com
• TS-AMERICAS@telit.com
• TS-APAC@telit.com
To Next Page
Loading...
Need help?
General
