LE910C1 Hardware User Guide
1VV0301298 Rev. 1.08 - 2017-11-14
Reproduction forbidden without written authorization by Telit Communications S.p.A. - All Rights Reserved
Telit Confidential Information, provided under NDA Page
20 of 119
Function Features
Form factor Form factor (28x28mm), accommodating the multiple RF bands in each
region variant
Environment and
quality
requirements
The entire module is designed and qualified by Telit for satisfying the
environment and quality requirements.
Single supply
module
The module generates all its internal supply voltages.
RTC No dedicated RTC supply, RTC is supplied by VBATT
Operating
temperature
Range -40 °C to +85 °C (conditions as defined in Section 2.5.1, Temperature
Range).
NOTE:
The following interfaces are unique for the LE910C1 and may not be supported on other (former
or future) xE910 family. Special care must be taken when designing the application board if
future compatibility is required:
- SGMII for Ethernet connectivity
- SDIO for WIFI connectivity
- SD/MMC for SD Card connectivity
To Next Page
Loading...
Need help?
General
