Telit Wireless Solutions ME910C1 Series User Manual

ME910C1 HW User Guide
1VV0301351 Rev.8 Page 45 of 99 2018-09-28
For example: Let us assume you need to drive the HW_SHUTDOWN* pad with a totem
pole output of a +3/5 V microcontroller (uP_OUT2):
In the following flow chart is detailed the proper restart procedure:
NOTE:
In order to avoid a back powering effect it is recommended to avoid
having any HIGH logic level signal applied to the digital pins of the
ME910C1 when the module is powered off or during an ON-OFF
transition.

Telit Wireless Solutions ME910C1 Series Specifications

General

Brand	Telit Wireless Solutions
Model	ME910C1 Series
Category	Wireless modules
Language	English