Telit Wireless Solutions UE910 series - 14 Mounting the Ue910 on the Application; General; Module Finishing & Dimensions

Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 74 of 93
14 Mounting the UE910 on the
application
14.1 General
The UE910 modules have been designed in order to be compliant with a standard lead-free
SMT process.
14.2 Module finishing & dimensions
Pin B1
Dimensions in mm
Bottom view
Lead-free Alloy:
Surface finishing Ni/Au for all solder pads
DRAFT