Telstra 13350 - Telephone Base and Handset Installation

12
SETTING UP
Telephone base installation
Plug the mains power adapter cable into the base station, plug the other
end of the mains power adapter into a mains power wall socket.
Insert one end of the telephone line cord into the base station and the other
end of the telephone line cord into a telephone wall jack. If you have DSL
high speed internet service, a DSL lter (not included) is required.
CAUTION:
If you subscribe to telephone service from a cable company or a VoIP service provider,
plug the telephone line cord into the modem/router/terminal adapter provided by your
cable/VoIP service provider. Contact your cable/VoIP service provider if you have any
difculties in installation.
1.
2.
Telephone line cord
If you have DSL high-speed
Internet service, a DSL lter (not
included) is required.
Telephone base
power adapter
Mains power
wall socket
Telephone line jack
Power cord jack