Telstra 13350 - Remote Access Code; Message Alert Tone; Message Recording Time

59
REMOTE ACCESS CODE
A two-digit security code is required to access the answering machine
remotely from any touch-tone telephone. The preset code is 00. You can set
the code from 00 to 99.
Press when idle.
Press or to scroll to Answering sys, then press .
Press or to scroll to Ans sys setup, then press .
Press or to scroll to Remote code, then press .
Enter a two-digit number, then press .
MESSAGE ALERT TONE
When the message alert tone is set to On, and there is at least one new
message, the telephone base beeps every 10 seconds. The message alert
tone is preset to Off.
There is no audible alert at the handset.
Press when idle.
Press or to scroll to Answering sys, then press .
Press or to scroll to Ans sys setup, then press .
Press or to scroll to Msg alert tone, then press .
Press or to scroll to On or Off, then press .
MESSAGE RECORDING TIME
You can set the recording time allowed for incoming messages. The message
length is three minutes by default.
Press when idle.
Press or to scroll to Answering sys, then press .
Press or to scroll to Ans sys setup, then press .
Press or to scroll to Recording time, then press .
Press or to scroll to 3 minutes, 2 minutes or 1 minute, then press .
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.