Telstra 13350 - Key Tone; Use Calling Number Display to Automatically Set Date and Time; Quiet Mode

50
kEY TONE
The handset is set to beep with each key press. You can set the key tone
volume or turn the key tone off for each handset.
Press when idle.
Press or to scroll to Tones, then press .
Press or to scroll to Key tone, then press .
Press or to scroll to sample each volume level (total 4 levels,
including Off), then press .
USE CALLING NUMBER DISPLAY TO AUTOMATICALLY SET DATE
AND TIME
If you subscribe to Calling Number Display service, the date and time are set
automatically with each incoming call. Follow the steps below to turn the CID
time sync feature on or off. The default setting is On.
Press when idle.
Press or to scroll to Settings, then press .
Press or to scroll to CID time sync, then press .
Press or to scroll to On or Off, then press .
qUIET MODE
You can turn on the quiet mode for a period of time (1-12 hours). During this
period, all tones (except paging tone) and call screening are muted.
When you turn on the quiet mode, the answering machine turns on
automatically. When the quiet mode duration expires, the answering machine
remains on.
1.
2.
3.
4.
1.
2.
3.
4.