Telstra 13350 - Chain Dialing; Transfer a Call

37
CHAIN DIALING
Use this feature on the cordless handsets to initiate a dialing sequence from
numbers stored in the phonebook, call list or redial list while you are on a call.
To access a number from the phonebook while on a call:
Press .
Press or to scroll to Phonebook, then press .
Press or to scroll to the desired entry, then press .
To access a number from the call list while on a call:
Press .
Press or to scroll to Caller ID log, then press .
Press or to scroll to the desired entry, then press .
To access a number from the redial list while on a call:
Press to enter the redial list.
Press , or repeatedly to browse to the desired entry.
Press .
TRANSfER A CALL
While on an outside call, you can transfer the call from a handset to another
system device.
To transfer a call from a handset:
During a call, press . Press or to scroll to Transfer, then press .
If you have two or more handsets/pendants, press or to scroll to
the desired device and then press .
The outside call is put on hold and the handset shows Transferring call/
Transferring call to all. The destination device rings.The destination device rings.
To answer the call on the destination handset, press , or any dialing
key.
1.
2.
3.
1.
2.
3.
1.
2.
3.
1.
•
2.