40
POWER fAIL BACk-UP
Telstra’s Power Fail back-up system lets you make calls during a mains power
interruption with your cordless phone. During a mains power interruption, you
can supply the power stored in your handset battery to the base unit, so you
can make calls even when the power is out.
Make a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
Once the handset is placed onto the main base unit, enter the telephone
number, and then press or . The speakerphone will be turned on
automatically and call is made.
OR
Lift up the handset and enter the telephone number.
Place the handset back onto the main base unit within 60 seconds.
The speakerphone will be turned on automatically and call is made.
Handset may show Please wait… whilst the handset starts up the base
before dialling.
To end the call, press .
1.
1.
2.
3.
Notes:
If there is more than one handset registered to the base, the handset on
the main base unit should be left as a power supply of the base and you
can use the other handset(s) to make calls like normal.
The handset should always remain on the main base unit for the entire
length of the call.
•
•
To Next Page
Loading...
