41
Answer a call using Power Fail Back-Up mode
If there is only one handset registered to the base:
When the phone rings, keep the handset on the main base unit and
press or to answer the call. The speakerphone will be turned on
automatically and call is answered.
To end the call, press .
1.
2.
Notes:
If there is more than one handset registered to the base, the handset on
the main base unit should be left as a power supply of the base and you
can use the other handset(s) to receive calls like normal.
The power supplying handset should always be placed on the main base
unit for the entire length of the call.
The range of the base unit is limited during Power Fail Back-Up mode.
Keep the handset close to the base unit.
To save power, suggest turning off the answering machine in Power Fail
Back-Up mode and turning on only when necessary.
•
•
•
•
To Next Page
Loading...
