Telstra 13350 - Set Date and Time; Calling Number Display Voice Announce

48
Pendant ringer tone (only for model with pendant):
Press when idle.
Press or to scroll to Pendant, then press .
Press or to scroll to Pendant ringer, then press .
Press or to scroll to sample each ringer tone, then press .
SET DATE AND TIME
The answering system announces the date and time of each message prior
to playing it. Before using the answering system or reminder, set the date
and time as follows. If you subscribe to Calling Number Display service, the
date and time are set automatically with each incoming call. Make sure the
settings are correct so that the reminder feature works properly.
Press when idle.
Press or to scroll to Set date/time, then press .
Enter the month, date and year, then press .
Enter the hour and minute, then scroll to select AM or PM.
Press .
CALLING NUMBER DISPLAY VOICE ANNOUNCE
The voice announce feature lets you know who’s calling without having to look
at the display.
Press when idle.
Press or to scroll to Annc Caller ID, then press .
Press or to scroll to the desired option, then press .
Set all On/Off - Change the setting for all devices.
Local handset - Change the setting for that handset only.
Base - Change the setting for the telephone base only.
Pendant - Change the setting for the pendant only (pendant mode only).
Press or to scroll to On or Off, then press .
1.
2.
3.
4.
1.
2.
3.
4.
5.
1.
2.
3.
•
•
•
•
4.