EasyManua.ls Logo

Telstra 13350 - Battery Low Warning; Battery Performance

Telstra 13350
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
IMPORTANT
Check for a dial tone by pressing . If you hear a dial tone, the installation
is successful.
WARNING
Do not place your Telstra 13350 in the bathroom or other humid areas.
IMPORTANT
The base station must be plugged into the mains power socket at all times.
Do not connect the telephone line until the handset is fully charged. Only use
the power adaptor, telephone cables and NiMH batteries supplied with the
product.
BATTERY LOW WARNING
If the icon ashes in the handset display you will need to recharge the
handset before you can use it again.
During charging, the icon will appear to be lling in the display.
BATTERY PERfORMANCE
In ideal conditions, the fully charged battery should give up to 12 hours talk
time, or 160 hours standby time, on a single charge. Note that a new battery
will not reach full capacity until it has been in normal use for several days.
To keep the batteries in the best condition, leave the handset off the base for
a few hours at a time. Running the battery right down at least once a week will
help it last as long as possible. The charge capacity of the rechargeable battery
will reduce with time as it wears out, giving the handset less talk / standby time.
Eventually it will need to be replaced. A replacement battery can be obtained by
contacting TecHelp on 1300 369 193 or from your local electrical retailer.
After charging your handset for the rst time, subsequent charging time is
about 6–8 hours a day. The battery and handset may become warm during
charging, however, this is normal.

Table of Contents

Related product manuals