71
Out of range OR Base no power appears on my cordless handset.
Ensure you plug the telephone base in properly and the power is on.
Place the cordless handset closer to the telephone base for
synchronization.
Move the cordless handset closer to the telephone base. You may have
moved out of range.
Reset the telephone base. Unplug the electrical power. Remove the
handset battery. Wait for 15 seconds then plug it back in. Allow up to one
minute for the cordless handset and telephone base to reset.
Other electronic products can cause interference with your cordless
phone. Try installing your phone as far away as possible from these types
of electronic devices.
The handset battery does not accept charge while in the handset charger.
If the cordless handset is in the handset charger and the charge light is
not on, refer to The charge light is off on page 74.
Charge the battery in the cordless handset for at least 11 hours. For
optimum daily performance, return the cordless handset to the handset
charger when not in use.
If the battery is completely depleted, charge the handset for at least
30 minutes before use.
You may need to purchase a new battery.
The pendant battery does not accept charge while in the pendant charger.
If the pendant is in the pendant charger and the pendant status light is
not on, refer to The charge light is off on page 74.
Charge the battery in the pendant for at least 3 hours. For optimum daily
performance, return the pendant to the pendant charger when not in use.
If the battery is completely depleted, charge the pendant for at least
30 minutes before use.
•
•
•
•
•
•
•
•
•
•
•
•