Tenda A18 User Manual

9
If the repeater cannot find the WiFi network of your router. Try the following solutions:

Ensure that the WiFi network of your router is enabled and can be detected by your WiFi device.
Tap Rescan, and wait a moment.

Change the channel of your router, and try again.

Change the encryption type of the router to WPA-PSK or WPA2-PSK, and try again.
Step 6 Enter the password of the WiFi network you want to extend, change the SSID as needed,
and tap Extend.
Configuration of Repeater SSID is a tradeoff between better roaming experience and convenient
management. Therefore, modify it based on your actual requirement.

If you keep it identical with your existing WiFi network name, you may enjoy a better roaming
experience when moving around, but may have troubles when logging into the Web UI for
management since your management device may stay connected to your existing WiFi network
other than your repeater.

If you set it differently from your existing WiFi network name, you can log into the Web UI
conveniently so long as your management device is connected to your repeater’s SSID, but the
roaming experience may be affected.
Step 7 Wait until the Signal LED indicator turns blue or red. Then, relocate the repeater following
the on-screen tips for optimal connection quality.

Tenda A18 Specifications

General

Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	867 Mbit/s
Supported data transfer rates	11, 54, 300, 867 Mbps
Security algorithms	SSID, WPA-PSK, WPA-TKIP, WPA2-PSK
Product type	Network repeater
Product color	White
LED indicators	Power, Signal strength, WPS
DC input voltage	9 V
Power source type	DC
Power consumption (max)	5.2 W
Power consumption (typical)	2.8 W
Frequency band	2.412 - 2.484, 5.15 - 5.25 GHz
Channels quantity	2 channels
Transmission gain	12 - 16 dB
Receiver sensitivity	-97 dBm, -76 dBm, -74 dBm, -72 dBm, -95 dBm, -63 dBm
Antennas quantity	2
Antenna gain level (max)	2 dBi
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Flash memory	8 MB
RAM capacity	64 MB
Harmonized System (HS) code	85176990

Weight and Dimensions

Dimensions (WxDxH)	58 x 48 x 80 mm