Tenda A18 - Setting Up Your WiFi Repeater; 2.1 Overview; 2.2 Extending the current WiFi coverage

5
2 Quick setup
2.1 Overview
The repeater supports 2 working modes: the Repeater mode and the AP mode. In Repeater mode,
you can extend your existing WiFi network for broader WiFi coverage. While in AP mode, you can
connect the repeater to a router through an Ethernet cable to convert the wired network
to wireless one.
Choose your scenario and perform setup.
If you want to
Set the repeater to
See
Extend your current WiFi
coverage
Repeater mode
2.2 Extending the current WiFi
coverage
Convert wired network
to wireless network
AP mode
2.3 Turning wired network to WiFi
network
2.2 Extending the current WiFi coverage
Method 1: Extending your WiFi network using web UI (recommend)

A desktop computer can connect to the WiFi network only when it is installed with a wireless
adapter.

The following describes the configuration steps using a mobile phone.
Step 1 Plug the repeater into a power outlet near the router in the same room. Wait until the
PWR LED indicator turns solid blue.