Tenda A18 User Manual

1
1 At a glance
1.1 Overview
With two external omni-directional antennas, the repeater can provide larger WiFi coverage,
as well as ultra-fast data rate. With the upgrade Setup Wizard, it only takes you three steps to
configure your repeater, which is easy to use. It works well with mainstream WiFi routers available
on the market.
1.2 Features

Supports 2.4 GHz and 5 GHz bands.

Auto channel detection for stable, reliable and fast internet connection.

Supports to extend a WiFi network without security or encrypted with WPA-PSK, WPA2-PSK
and mixed WPA/WPA2-PSK.

Mixed WPA/WPA2-PSK and AES encryption mechanism ensure higher network security.

Repeater mode and AP mode for various application scenarios.

Tenda A18 Specifications

General

Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Ethernet LAN	Yes
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	867 Mbit/s
Supported data transfer rates	11, 54, 300, 867 Mbps
Security algorithms	SSID, WPA-PSK, WPA-TKIP, WPA2-PSK
Product type	Network repeater
Product color	White
LED indicators	Power, Signal strength, WPS
DC input voltage	9 V
Power source type	DC
Power consumption (max)	5.2 W
Power consumption (typical)	2.8 W
Frequency band	2.412 - 2.484, 5.15 - 5.25 GHz
Channels quantity	2 channels
Transmission gain	12 - 16 dB
Receiver sensitivity	-97 dBm, -76 dBm, -74 dBm, -72 dBm, -95 dBm, -63 dBm
Antennas quantity	2
Antenna gain level (max)	2 dBi
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Flash memory	8 MB
RAM capacity	64 MB
Harmonized System (HS) code	85176990

Weight and Dimensions

Dimensions (WxDxH)	58 x 48 x 80 mm