Tenda A27 - Client Management; Client Management Overview

Version1.0
50
8 Client management
8.1 Overview
To access the page, choose Client Management.
On this page, you can view the wireless clients currently connected to the WiFi network of the
WiFi extender, view the blacklist, and add a wireless client to the blacklist or remove a wireless
client from the blacklist.
After entering the Client Management page, you are led to All Client module by default, which is
shown as below:
Parameter description
Parameter
Description
Device Name
It specifies the name of the wireless client.
Mac Address
It specifies the Mac address of the wireless client.
Connection Type
It specifies the wireless client’s type of connection to the WiFi extender.
Operation
Click Add to Blacklist, then the corresponding wireless client is added to the blacklist.