Tenda A33 User Manual

Version1.0
79
Step 5 Confirm the prompt message and click Upgrade.
---End
The upgrade progress prompt will appear on the page. After the upgrade is completed, log in to
the web UI of the extender again, and check the Current firmware version in the Firmware
Upgrade module, confirm that it is the same as the firmware version you just upgraded.
To better experience the stability and value-added functions of the higher firmware version, after the
upgrade is completed, please reset the extender to its factory settings.
Local Upgrade

To avoid damage to the extender, please use the correct upgrade file to upgrade. Generally, the
file suffix of the firmware upgrade file is .bin.

It is recommended to connect the computer to the LAN port of the extender with a network cable,
and then log in to the web UI to upgrade the firmware.

During the upgrade, do not power off the extender or disconnect it from the internet; otherwise,
the upgrade may fail or the extender may be damaged.
Step 1 Visit Tenda's official website www.tendacn.com download the latest upgrade file of the
corresponding model extender, save it to your local computer and unzip it.
Step 2 On the computer connected to the extender, open the browser to visit re.tenda.cn to
access the web UI of the extender.
Step 3 Choose More > Maintenance, then find Firmware Upgrade module.
Step 4 Click Firmware Upgrade.

Tenda A33 Specifications

General

Maximum data transfer rate	1000 Mbit/s
Antennas quantity	2
Antenna gain level (max)	5 dBi
Wi-Fi	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Frequency band	5/2.4 GHz
Signal strength	20 dBm
Top Wi-Fi standard	Wi-Fi 6 (802.11ax)
WLAN data transfer rate (max)	2402 Mbit/s
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Connectivity technology	Wired & Wireless
Ethernet LAN (RJ-45) ports	1
Security algorithms	WPA-PSK, WPA2-PSK, WPA3
Power LED	No
Product type	Network repeater
Product color	White
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	CE, RoHS
Certification	FCC
DC output current	1 A
DC output voltage	12 V
Power consumption (typical)	11 W

Weight and Dimensions

Depth	72 mm
Width	123 mm
Height	47.5 mm