the DHCP server is deactivated by default in this mode to avoid
potential collision and the Ethernet port is working as a LAN port
only, so you must config TCP/IP settings manually on your PC to
connect to the device using an Ethernet cable.
It’s best for connecting your multimedia player, IPTV set-top
box or other internet-enabled device to a wireless network.
Refer to below topology for deploying network devices
involved when using this mode.
For details, see section 5-4.
3.5 Universal Repeater Mode
In this mode, the device delivers wireless repeating function
and amplifies wireless signal without changing network topology.
Use this mode to amplify and transmit wireless signal when
sharing wireless Internet connection with your neighbors.
It is best for use with an IPTV set-top box, broadband
satellite receptor or for purpose of extending existing coverage.
To Next Page
Loading...
Need help?
General
