Chapter 6 Network
6.1 LAN Settings
This section allows you to config the TCP/IP settings for the
device’s LAN interface. Settings to config vary depending on
different working modes.
1. If you are currently using the WISP/Wireless Router Mode,
see below:
IP Address: Device’s LAN IP, 192.168.2.1 by default. You can
change it according to your needs; just remember to use
the new one to log on to the device’s web utility if you
changed it.
Subnet Mask: Device’s LAN subnet mask, 255.255.255.0 by
default.
2. If you are currently using the Wireless AP/Client/Universal
Repeater Mode, see below:
To Next Page
Loading...
