Tenda A6 - MAC-Based Wireless Access Control; Connection Status

Wireless N150 Mini AP/Router
47
7.3 MAC-based Wireless Access Control
The MAC-based Wireless Access Control feature can be used
to allow or disallow clients at specific MAC addresses to connect
to your wireless network.

Wireless Access Control: “Allow” only allows PCs at
specified MAC addresses to connect to your wireless
network while “Deny” only blocks PCs at specified MAC
addresses from connecting to your wireless network.

MAC Address: Enter a MAC of a wireless client manually
and click “Add”.
 Add: Click it to add a new MAC to the MAC address list.
 Delete: Click it to remove an existing entry.
7.4 Connection Status
This interface displays the information of currently connected
wireless clients (if any).