12.4 Restore to Factory Default Settings
To restore all settings to the device's factory default values, click
the "Restore to Factory Default” button:
Factory Default Settings:
User Name: admin
Password: admin
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Note: To activate your settings, you need to reboot the
device after you reset it.
12.5 Firmware Upgrade
Firmware upgrade is released periodically to improve the
functionality of your device and also to add new features. If you
run into a problem with a specific feature of the device, log on to
To Next Page
Loading...
