our website www.tendacn.com）to download the latest firmware
to update your device.
To update firmware, do as follows:
1. Click "Browse” to locate the firmware and "Upgrade” to
update.
2. Router will reboot automatically when upgrade
completes.
NOTE: Do not disconnect the device from your
management PC (the PC you use to configure the device)
or power off itduring the upgrade process; otherwise, it
may be permanently damaged. The device will restart
automatically when the upgrade process, which takes
several minutes to complete.
12.6 Reboot
This section allows you to reboot the device. New settings will be
activated after reboot. And WAN connection will be disconnected
To Next Page
Loading...
