For convenience purpose, it is advisable to use the “Open Scan”
option to search and select the link partner to add certain
settings to the device automatically.
After you finish the above settings, click “Next”.
3. Below screen shall display.
SSID: Service Set Identifier), unique wireless network name;
Define a wireless network name (SSID) for the device.
Channel: Select a channel from the drop-down menu for
the device to operate on. There are 13 channels available.
For security purpose, it is advisable to encrypt your wireless
network with WPA-AES. Simply enter a security key made up of
8-63 numeric, alphabetic and characters. For detailed
configurations, refer to section7.2 hereof.
Note: It is strongly recommended not to change the channel
settings when using this mode, as improper change may cause
connection failure. After you finish above settings, click “Next”.
After finishing above settings, set PCs to “Obtain an IP address
automatically”.
To Next Page
Loading...
Need help?
General
